Truck EGR (Exhaust Gas Recirculation) Engine

EGR, commonly known as an exhaust gas recirculation system, is the purification device for the nitrogen oxides NOx that is one of the hazardous gases exhausted by the engine. Due to this system, a small amount of exhaust gas generated by the truck EGR engine will go back to the cylinder to delay the combustion process. The total flow of exhaust gas is decreased so that the nitrogen oxides are reduced in the end. Then the emission standard is improved.

Product Features
1.Low Cost
This truck EGR engine gets some slight changes based on the China II emission standard. The versatility rate of its parts exceeds 95%. The fuel injection system is similar to the inline pump that is consistent with the China II standard, not sensitive to the fuel products.

2. Low Fuel Consumption
There are 7 small orifices for fuel injection with high flow rate ranging from 1200 to 1400ml/min. This product gets the fuel atomized thoroughly and optimizes the timing performance of the intake valve. At the later stage of the intake stroke, the valve will be closed for getting the air in the cylinder expanded to reduce the temperature of the inner air properly, as well as the maximum combustion temperature. This is the working process of Miller Cycle Theory.

Through the EGR system in the cylinder, the inert gas is increased in the cylinder to inhibit the generation of NOx. Due to the inner EGR and Miller Cycle technology, the flow rate of the intake air is reduced, the combustion at low air fuel ratio comes true and the emission is decreased successfully.

3. Low Maintenance Cost
This truck EGR engine is same as the diesel engine of China II standard in several aspects, such as the operation, repair and maintenance.

• 1. 
  2. 95/135/G128 Series Marine Diesel Generating Sets 50-275KW
• 1. 
  2. SDEC Marine Gearbox-Hangzhou Advance 600-4000RPM
• 1. 
  2. R Series Diesel Engine
• 1. 
  2. SC10E (EGR)
• 1. 
  2. 15G Series Marine Engine